Voodoo3 & 5 Lasagna MEGA7/Ultra VIVA K7 GeForce

TNT

P3 STF

order now

 Happy Customers  are saying  .....

What's New@TennMax TennMax United
best view with IE 4 and up     TennMax@aol.com

 

Thank you very much for getting back to me so soon never had an email responed to that fast by any company :)

            Andrew       8.31.01


Thanks for your help in getting the correct Lasagna cooler for my Visiontek (GeF) video card. The modified Type B fit perfectly. .....  It has been a pleasure dealing with Tennmax.  Your service was TOP NOTCH!!

        Ray Hoffman        8.6.01


I have been running my PIII at about 200 MHz beyond its factory default for a month now without any problems and CPU temperature barely reaches 49 degrees Celsius thanks to P3-STF cooler.The reason I cannot overclock more than that is because the components,apart from CPU, seem to be incompatible with higher bus speeds and need careful tweaking.I am sure the CPU temperature will remain reasonable at much higher speeds but I cannot test it.

By the way,the powerful and not so noisy fans help reduce the overall system temperature :-)

        Murat Ceylan - Turkey       7.30.01


Wow! you really are wicked fast in support and respons!

Thanks! and you can count on my vote!

       Petter Flink         7.18.01


Just a short mail to say 'thanks'...

The Cooling Fans arrived in Switzerland on Tuesday, I guess that's almost exactly one week after you sent them which I think is pretty good.

The Mega 7 fits the Socket 7 on my GigaByte GA-586SG motherboard without any problems and the Lasagna sits very nicely on my Asus 3400TNT Graphics card. I stuck the old graphics card heatsink onto the SIS 5591 chip on my motherboard (I noticed it was getting a bit hot) using one of your thermal tape squares at the same time as I fitted your fans, and since that time my computer system has run without any of the system hangs or crashes which I had been getting used to after fitting the 500MHz AMD K6-2!

         Neil Hearne  - Switzerland   07.14.01


I ordred a "Lasagna BGA Type 0" cooler to my TNT2Ultra graphic card, 23.05. and today 28.05. it is spinning, very silent, already in my computer in Denmark. Thank you so much, for your very quick service and shipping. It seems to be very good product. Truely, I will spread a lot of good words about the "TennMax" company" in our area of Denmark. Again thank you very much.
Your sincerely,


         Reinhard Gründler - Sweden    5.28.01


I just wanted to write back and say WOW. My order was placed on a Friday afternoon and I received all the coolers the following Monday. The two Stealth V3 Fighters work great after following the directions linked to your web page. The Lasagna BGA cooler I ordered for my chipset fits perfect (more then I can say for the Thermaltake Chipset Blue Orb I had to rig to fit the board).  ...... .......  ........... .....

Great service and product, keep up the good work.

            Steve Sitter         4.25.01


I've never had a better customer service experience with a web order company before! I'll certainly order from Tennmax again in the future :)     

Thank you so much,

         Dean Liou          4.19.01


Thanks for your promptness and politeness. Its hard to find companies like yours these days. I ALWAYS think of you guys first when I need cooling.

         John  Carson         4.13.01


I have recieved the two Lasagna Type B coolers and placed them on my ASUS A7V133 motherboard and my Creative Geforce GTS   2 Ultra  64mb DDR graphics card. They both work great! Almost soundless and cooling like I'd never believe.

       John Nielsen - Denmark     4.8.01


Just wanted to say "thanks". I've purchased from you twice, and both times the product was better than advertised. Keep up the good work and good
communication!

          John Vann      4.3.01


Every dealing with you has been great thus far, and my recent visit to your website confirms you're still going strong. I endorse your product during any processor discussion. Keep up the good work...

          David T Bianchi       3.30.01


Thanks for getting back to me so fast! This you've made it crystal clear.   Lasagna for Dummies. Thank the stars for you folks. These old original Geforce 256 cards sure do burn fans up quickly!    ............

         Dave Smith        3.19.01


hiya all, just a quick note to thank you for a VERY QUICK delivery the cooler arrived this morning,and was installed and running in about 10 minutes, very easy to do.   thanks for excellent service.

       Kevin Hicks            3.17.01


Just want to thank you for the fans (Stealth V3 Fighters). Best purchase I've made for this PC yet :P Took me a few minutes to fit, along with a dab of artic silver, and it's really managing to keep the V5 temp down! Couldn't be happier... even overclocked the coolers are doing a grade A job of keeping the card nice and cool.

I'll definately spread the word, cos for the price they were, they're bloody brilliant! Anyway, just thought I'd let you know how happy I am with the fans :)

       Alex Hudson - UK       3.14.01


by the way I already ordered you a lasagna fan for my graphic card and I'm very happy with it. I have told everybody about you (for example I just sent a post on a newsgroup in reply to someone who was looking for a fan and gave him your website URL...)
I'm French and have some difficulties to find that kind of heatsinks/fans here. Your products are very good and I recommend them. Your website could be clearer though (the products should have precise specifications with direct links to online ordering). And I wish "longue vie" to TennMax !

     Jean-Roch Dumas - France     2.17.01


I just received the parcel with the awaited cooler and I must say it's absolute great how you dealed my order. The cooler fits perfectly on my graphic card and I have now a great graphic quality.

I really apriciate the great quality of your company and please note that I will send you more order for some coolers, but this only next week

Again absolutly great job!

I enjoy to hear from you and greetings here from your new customer in Switzerland        Kindest regards,

     Jacques Dalissier - Switzerland    2.13.01


many many thanks to TennMax, i ordered three p3 tf coolers on february 7th, i figured that the package would arrive in the u.k.in six days, well TennMax did even better than that with a five day delivery, i received my package this morning february 12th, TennMax must have commissioned the space shuttle for its express delivery service, its simply the best.

    James O' Hagan   -  N. Ireland   2/12/01


I thank you for all your help and suggestions. Your service/price are excellent. Just received my two TennMax fans and grease last night, as ordered. Will remove, clean and install this weekend. After my own buying experience, I believe all the testimonials I see on your Website and Resellers.com are genuine. Maybe you should branch out and carry additional hardware.... Keep up the good work!

            Suresh Patel       2.1.01


Your P3 STF is keeping my P3 750 @1000 nice and cool!

            Don Davis         2.1.01


I got my cooler yesterday and I can't believe how fast your turn around is. I also wanted to let you know that the cooler (Lasagna XEON Cooler) performs better than I expected. Very cool design. I plan to order another one soon. If you like when I get the time to get my site up I will provide a link to your page..  http://badontech.com   Thanks,

      Jason L. Badon   1.30.01


I would just like to say that this is the second CPU cooler I have purchased from TennMax. Besides the excellent quality in cooling units, for I am someone who sleeps well at night knowing that my hardware is not gonna burn up, the excellent quality service and fast response of TennMax is what makes dealing with you guys such a pleasure. Keep up the great work. My CPU is much happier thanks to you all. (Personifying my CPU? That's it, I have gotten one step closer to becoming a true geek :-))

      Charlie  Wagoner         1.28.01


Arrived safely today (UK in 4 days) - excellent service, and considerably quicker than I   was expecting from orders placed with other US cooling hardware companies.

The hardware is excellent, too - it fitted perfectly on my 3500 (unlike the Blue Orb, which didn't fit at all!) - and I'm seeing a reduction of at least  5 degrees centigrade against the stock heatsink. Impressive, and quite a relief.... ....

Thank you for such an excellent response to my order.

      Dominic Thomas - UK     1.25.01


I have a normal $145 G400 card, I used my Lasagna and I was able to overclock my card about 30% faster. And Im getting the same speed as if I had bought a $200 G400 MAX V. Card.

    Alejandro Bilbao - Dominican Rep.  1.15.01


I received the cooler (Lasagna BGA Cooler Type B) yesterday.   It was easy to install and is doing an  excellent job. I can feel the difference on the outside of the card.

        Matt Green       1.15.01


The cooling fans arrived today-that was fast! (ordered via PayPal on Friday, recieved pacakge on Monday) Thanks-you guys are awesome.

        Steve Deyton       1.8.01


Yeah I'm a user on MadOnion and I have spread the word about you guys, and people like the looks of the cooler, I posted some URLs on reviews and they all agree. Nice product!

        Kevin King        1.3.01


Thanx for the great service.... ordered it on Sunday, and got it on Wednesday! (beats the Xmas postal traffics)   Installed easily once. I finally read the installation guide (men DON'T ask/need directions <grin>).    Thanx again....great product too.

      Terry Mohrmann      12.23.00


Thanks for the prompt delivery. I am pleased with the ease of the install, and the product looks great! I'm so glad you have an effective, yet compact fan for my (formerly fanless) board. Without it, I would have lost a PCI slot that I need to use. Once again, thanks!

        David Singer          12.20.00


I should have sent this (Lasagan BGA Cooler Type B) over a week ago - The fan turned up via air mail amazingly quickly, and it works beautifully - thanks for your prompt service.  Have a good Christmas!!

       Dave Harmes - UK    12.12.00


I received my Lasagna Cooler last Friday. I'm very satisfied of it ! Thanks for being so efficient and fast ! I'll definitely recommend you to my friends. (as a matter of fact, I already did ! :) ) Regards,

       Alex Gomes - Belgium    12.11.00


You have an awesome website! I was very impressed with how easy it was to get the products (Lasagan BGA Cooler Type A and B) that I needed.

A+ for your effortsWhen you care about the customer..............You always win!

        Larry Mitchell      12.6.00


I recently ordered a product from you and was very happy with the results and tek supporrt I recieved.  ...........  I appreciate all the help you have given me and I let it be known to friends and review sites as well. You guys rock!  THNX,

          Paul Reed      11.18.00


I received the coolers today. That was quick. I wasn't expecting them to arrive so quickly.

Now my SLI setup will run much cooler and won't lock up when doing benchmarks or 3d games. Thanks!

        Ryan Bowles      11.1.00


I received yesterday my new Stealth V3 Fighter Cooler and I am impressed with it. Installation of new device was easy and works perfectly - it cooled GPU's temps over 5 degrees on full load!

Because of satisfying product I would like to order one more device.

       Simo Mäkinen - Finland   11.01.00


I just wanted to reply and say that I am very impressed with your fast service. I received my order (Lasagna BGA Type B) on Friday, just three days after ordering it.

          Chris Nims       10.31.00


Ure telling me. TennMax service is second to none. :)      Regards,

     Charlie  Leach   UK     10.25.00


I ordered one (iOp Cooler for I-Opener) about 2 months ago, which worked great. I need another one now.

         Michael Velotta     10.22.00

TennMax note: We are shipping all products, including the popular iOp Cooler, on the same day orders are confirmed.


Just got my cooler (Stelath V3 Fighter) today and i just wanted to let you guys know that this thing rules! I had display problems before that i thought were related to the latest 'beta' driver (3Dfx Voodoo3 3500). It works so much better now!
      Great product! .....     Thanks!

           Mark  Bayne       10.21.00


I cannot believe the service you provide, two days after placing an order it arrives, travelling half way round the world in the process. Back home I place orders with a company (A big national outfit) sixty miles away and the best they can do is ten to fifteen days. By the way your product (Lasagna BGA Cooler Type B) is superb it has dropped the temp by 11 degrees C against the original fan from Creative Labs. Many thanks again for the tremendous service. Yours,

         Gavin Philp      UK     10.20.00


I'm not an expert in the field of cooling, and I haven't had a chance to compare many heatsinks. but I'd just like to take a moment to say that I am very satisfied with the performance of the P3 STF Cooler. I bought a new heatsink because my processor kept on overheating, so I researched heatsinks on www.heatsink-guide.com and the P3 STF was listed as one of the best SECC2 coolers, and now there is a SIGNIFICANT improvement in performance.

        Kevin Wu      10.19.00


I just received your package and would like to thank you for your fast service. I especially appreciate you sending me the spare push pins for my Lasagna coolers. All the products I ordered from you until now, are still working great and I have recommended your products to several of my friends. I will continue to do so.

Best regards and thank you again,

   Chiel Kersten - The Netherlands   10.17.00


Thank you for the prompt service. It's my second product (Stealth V3 Fighter) I've ordered from Tennmax, and I have to mention that I've been promoting your products for over a year or more. I regularly answer messages at the official 3dfx message boards. In the overclocking section, I refer customers to your website , on average 1-2 per week. It's not a huge amount of people, but I think as word spreads , so does your buisness . It's my way of thanking you for making quiet, reliable and inexpensive products ...my overclocked voodoo card also thanks you :)

        Jim Dixon - Canada      10.11.00


TennMax Rocks! Many thanks to you guys. I purchased a Lasagna BGA Cooler for my Geforce board because the stock heatsink/fan was too hot to even touch (this is on a non-overclocked board). The Lasagna keeps the card a much more tolerable luke warm now. The added bonus is that my system can now wakeup from standby. Before when my system would go on standby, the GeForce's builtin fan would shut off and cause the card to overheat. When it would attempt to wakeup the machine would crash with weird artifacts on the screen. Since the Lasagna runs directly off the power supply, it keeps the card cool even in standby - no more hangups.

Anyway, just wanted to say thanks and let you know that I'm recommending you to all my buddies.

         Alex Holmes       10.10.00


Super! You get my vote for customer service!!!! This is the quickest handling of a problem that I have ever seen!! :) I'll get that in the mail ASAP!

Once again, thanks for taking care of this so swiftly!

         Hugh Parsons       10.6.00


I love your products, i already have one Lasagna Xeon Cooler from you guys for more than a year i would guess now, and its been a good one, just got to clean it out now and then like all the others.  (and just order another one)

        Peter Cox         09.26.00


Thank you for the quick shipment of my order. I am extremely pleased with the performance of the TennMax P3 STF cooler. I have a 500 mhz PIII which I had been running at 333 mhz because it ran so hot with the CTK cooler. At 333 mhz the CPU was 134 degrees and the MB was 95 degrees. With the TennMax P3 STF the CPU running at 500 mhz is 86 deegrees and the MB is 80 degrees. Now I can finally get the full performance of my 500 mhz PIII thanks to TennMax And not have to worry about the CPU melting down!

           Jason Long         09.24.00


Popped in both units (the Lasagna on the BX and P3 STF Cooler) and dropped my operating temp 15°C and proceeded to overclock the P3 600 (100FSB) to 672 (not supposed to be able to do that!) with no hiccups and no increase in temp.   Marvelous little devices!    Thanks,

             Jim Cooke        9.19.00


I did what you suggested and it helped. The temp. runs about 102 to 104 now. It's too bad they put the processor on the bottom of the card for tower cases, it would cool so much better if it was on the top. I should mention that my FSB is clocked to 133 on a BX chipset (Type A Cooler) forcing my video to run at 89Mhz (Type B Cooler on Matrox G400). So, 102F isn't too bad.   Thanks for your help,

         Ted Richie             09.16.00


Thank you for your service. I received my order product to you. The TennMax Stealth V3 Fighter Cooler works very good.   Yours Faithfully.

         Senichi Inoue  Japan     09.13.00


Many thanks for the extra bits for the cooler, it is now fitted and running.  Once again I am exceptionally impressed with the speed of service.  I am about to email one of the UK computer mags that I take to tell them about it.  Regards,
 
           Sarah Bryant    UK     Sept. 8, 2000


Consider the good word spread, I have always used your cooling solutions on my systems. They are the best! I have been using a Dual Fan cooler on a Celeron 300A for almost two years @ 464 MHz. I also just recently purchased an Intel 440BX cooler and it has greatly stabilized my newest creation. Keep up the good work, and you shall have a customer for life! Thanks.

          Robert Curnow         9.6.2000


Thank you very much for the package, I'm very happy with my purchase and the treatment I have received. I'll recommend your web to everyone of my friends.  Thank's to your attention. Good work.

        Jorge Naish   - Spain    9.3.00


Recently i bought the MEGA7 cooler for my Celemine 566 FCPGA to allow it to run cool @ 850 mhz. To no avail .... I thought i was just one of the unlucky owners that simply got a lemon out of all the VERY potent 566.

Yesterday i cleaned my computer after installing a new soundcard and i looked at the cooler surface (wehere it meets the cpu once more. The thermal conductive tape was all met away and turned into a sticky mess. I could not see how this greasy and sticky substance could ever conduct heat so i scraped it all off and cleaned the top of the Cpu as well. I used a fair share of that white thermal paste allowing the cpu to complete dissapear (a lot of paste) and replaced the cooler so i ws now on top of the cpu with a lot of that white goo in between and no more tape ...   Guess what, i have been running at 850 mhz now for 8 hours straight and this includes 6 hours of continuesly 3Dmark benchmarking to make sure it was stable.

My suggestion is to get rid of that thermal tape or whatever it is on the Mega 7 as it DOES hamper the performance giving it a bad name. The thermal paste simply works a lot better and is the difference for me to be running at 636 mhz (75 mhz fsb) or 850 mhz (100 mhz fsb).  Hope this helps you guys out,

     Sergio Kreeft     'Loyalle Tennmax customer'
      from  The Netherlands       8.30.00


note from TennMax: Grease is a more conformable material therefore can do better when operate at relatively low temperature or when the chip surface is not flat. If one uses grease, clean the chip surface and only use a very small amount.  Excess grease may increase thermal resistance at the interface.


Everything i read about this setup (P3 STF) is true... nothing in the universe installs this easy !!!   And my order was at my door before i knew it... now for some light overclocking... your fans and heatsinks are what i`ll be putting in my systems...

         Robert Ward          8/25/00


   (V3/5 Stealth Fighter Testimonial!)
I was having lots of problems with video card lockup with my 5500, especially in things like Unreal Tournament, or 3dMark. I have an extreme amount of air moving thru my case (almost 100CFM in, 100CFM out), with the internal case temp staying at or below the 70' ambient temp.

One of the times I opened up my case, I tried touching the back side of my 5500, over the GPU. I quickly yanked my hand away, and started sucking on the resulting blister! It was EXTREMELY hot! No expert on temps, I'd guess it to be 160' F or higher! Sad thing was that the heatsink & fan on the GPU weren't really that hot. Rotten Efficiency.

That got me thinking that temps might be the problem with my lockups. The case was cool, but the heatsink & fan on the GPU's just weren't cutting it.

End results? After installing the Stealth Fighters (which, after the work of removing the POS OEM's, was a piece of cake) the backside of the GPU's are barely warm to the touch. My conservative estimate is that the Tennmax coolers dropped the temps on my GPU's by 40' to 80' F which is HUGE!

I don't know why 3dfx doesn't just use these stock. In fact, I'm going to CC 3dfx on this email.

Oh yeah.. the lockups went away. I'm now running my card @ 185mhz and it's smooth as silk and ROCK solid. Now if I could just cool the RAM.

Another Happy Customer!

       Blammo         8.16.00


Thanks to your great service, if there is anything else I need that you sell, I would definitely buy from you again!! Thanks again!

        Ricky To       Australia         8.15.00


I (satified customer) must thank you for the execelent products you sell. I got my voodoo3 cooler (Stealth V3 Fighter) in less than a week. After installation and some other modifcations I was able to take my voodoo3 2000 from it's stock 143Mhz to  190Mhz. A 57Mhz increase. Impressive Indeed.   Thank You.

         Phil Przybyla          8.12.00


I purchased several P3STF's and Lasagna BX chipset coolers earlier this year and I wanted to let you know that more than halfway into the year, I'm overclocking all of my Pentium III's (533mhz, 600mhz and 667mhz) on Abit BE6-II's and Abit VT6X4 by running the FSB at 150Mhz without any problems or overheating! I have also provided more active cooling in the cases with 120mm fans and hard drive coolers and slot coolers. All of my systems are running below 98 degrees Fahrenheit and no BSOD's! Thanks again for making such efficient coolers and for providing us "tweakers" with high quality coolers! Keep up the great work!!!

           Arthur Zasadny          8.07.00


Thank you so much for the speedy service you provided. It was truly a tremendous help and is working great. Thanks again!

        David Claudio      8.06.00


I recently bought my first item from you guys, the P3 STF (3pin connector).  I just wanted to say that it kicks ass! My OC'ed PIII-700 (running at 854 MHz) runs at an average temperature of 43.5 C, even after looping 3dMark2000 for an entire night! Thats a 15-20C temperature drop from my previous fan! 

I am very satisfied with your service and products, keep up the good work!

          Mike Wong          8.05.00


My P3 STF arrived this morning to my address in Manchester, England (tuesday, 01/08/2000) at 8am. I am very impressed with your company indeed because I only placed the orderon Saturday at 5:30pm. I had my P3 450 secc2 up and running at 558mhz in no time at all. Comparing the standard intel fan with your product made me realise how poor the original fans are. This has been the most cost effective upgrade I have ever made! and I say that with all sincerity. Yours Gratefully,

            Andrew Phillips    UK     08.01.00


Thanks for the great (and fast) service!  Regards,

       Edwin - The Netherlands    7.20.00


It is nice that you take international orders. Besides your P3 STF has proven to be excellent, quiet enough & powerful. Keep up the good work! Geforce default (oroginal) fan stinks, only 4 months old and sounds like it is going to take off and fly away...  (That is why he ordered a Type B cooler today).

      Mika Tarkiainen - Finland    7.19.00


I got the two stealth v3 fighters for my Voodoo5 on Monday (ordered last Friday) and installed them that night. They installed perfectly and look great and are Lot BETTER quality than the stock fans and heat sinks. With the Stealth v3 Fighters I got my voodoo5 running @190.

Thanks for the great services and such a great product.

      Jason (IronBarr)        7.18.00


Ordered ur iOp fan for I-Opener 7/15, Saturday, got fan Monday morning, that's service. I will surly be ordering more from u in the future.  Why can't every body be that fast?   Thanks!

        Louie Pickett     7.17.00

note: TennMax always do the best for the customers, and this time the PostMan is also running very fast from Massachusetts to Alabama.


My Celeron 566->850 (with MEGA7 Cooler) is now as cold as a Canadian winter.

       Jacques Bourdouxhe  Canada   7.10.00


That has to have been the quickest reply ever from any company I've ever e-mailed. Very nice indeed. Just have to wait for my next pay check :) ......

        Johan Appelgren    Sweden   7.7.00


I figured if everything is working fine now, why mess around with it?  Thanks a lot for all your help! Now, I only wish other companies I am having "problems" with responded so quickly and courteously (just like TennMax)!

      Mike Shewchuk      7.05.00


I bought your Lasagna BGA Type B cooler for my Creative Labs Annihilator2 GF2 card and can I say WOW!!!! It cools twice as good as the original sink. I can touch the cooler now and it is just slightly warm!!! This is great! I can overclock it and get a score of 6489 marks on 3DMark 2000. I cannot believe it. I am hitting almost 2 gigatexels!!!! Holy S***......thank you, thank you, thank you. Heh by the way thank you!! Neways gotta go play some Q3 @1024x768x32bpp @ 93fps baby......so talk to ya later.

             Ivan           6.19.00


I got the heatsink (Lasagna BGA Cooler Type B) quickly and is working very good on my video card. Thanks for the fast shipping. I am very happy with your service and products. Thank you...

           Brandon Wallach      6.18.00


Excellent products + superb service = satisfied customers !
I recommended your company to all the PC enthusiasts I now.
Great JOB ! !  Thank You & Regards,

      David Lee Wong         6.15.00
      Tennmax Customer (since....1998)


I am very happy with the TennMax P3 TF Cooler. CPU (P3 866) was running at 70-80C, now running at 45-55C. I am also very happy with your fast shipping.

         Patrick Davy        6.12.00


I would like to thank everybody at Tennmax for the excellent coolers that you produce. I initially bought a Lasagna cooler for my voodoo3 3000 and was very impressed. I have recently upgraded my motherboard to an Asus P3V4X and when I was overclocking it to high fsb's (146+), it would be a little unstable. I decided to purchase a lasagna cooler to replace the green heatsink on the chipset. The result is that it is totally stable at 150fsb. I now have a Geforce256 DDR that NEEDS a lasagna cooler ;)

          Philip Harling, UK       06.11.00


Wow... you guys do support your products down to the end!   Thanks for the thermal tape!

          Wei Li                   6.6.00


THIS COOLER ROCKS!  (P3 STF w two connectors)

         Jim McLeod           5.22.00


P.S. You guys are the fastest suppliers I have ever had the pleasure to order from. Your response time has other vendors eating your dust. And your products, I use your TennMax P3 TF Cooler and the TennMax Lasagna BGA Type O Cooler, are excellent.

         Thomas Little            5.20.00


Thanks again, I have heard nothing but great thing about your company on the web. And it was all true.

           Scott Alder           5.9.00


I currently have 4-voodoo3 cards that are overclocked I could not have achieved this with other cooling fans you product (Stealth V3 Fighter)is superior  to all others out there,keep up the good work and please let me know A.S.A.P When you will carry the new fan for the voodoo 5.
 
           Ruben Alcantara        5.3.00


I purchased a Lasagna iOp Cooler last week for my I-Opener, my roommate saw how it lowered the CPU temp from 120+ to 91 degrees and bought it off me! So I'm here to purchase another. In short, it works great!

         Barry Soben         5.1.00


I received the P3 STF Cooler that I had ordered on 4/26/00. I appreciate your fast service and the exceptional performance of the Cooler. The CPU temperature averages about 20 degrees Celsius cooler than the generic cooler that was originally installed. Consider me a satisfied customer.

          Larry T.        4/30/00


.......  Anyone out there has a problem with his Voodoo 3 cards overheating. please order the Tennmax Stealth V3 Fighter. the Best 25 bucks I ever spend.  I think I might order 5 more and replace my Air conditioning !   Thanks Tennmax.
 
       Michael Thiran     Florida     4/29/00
 
PS. Please feel free to use this to promote your product as I feel good products that live up to their promises should get the exposure they deserve.


I ordered 2 of your Lasagna iOp Coolers and I am very impressed with your prompt delivery and the quality of the coolers. I am not a vendor, but I will keep you guys in mind for any of my future projects.  Thanks again,

            Mike Smith              4.27.00

Wow.  I am very impressed.  My order (Lasagna iOp Cooler) arrived just fine this afternoon. Congratulations on shipping it exactly when you said you would, have having that be the day after I placed the order (despite the fact that I really wasn't expecting to receive the parts for a week).

            Todd Palino               4.27.00                                  


Thank you for your swift response to my order of the Stealth V3 Fighter Cooler. I received it within three days. The instructions were easy to follow and the computer was lock up and running within ten minutes. My son plays games on our computer hence the Voodoo 3 card, and the heat given off by the passive heat sink was to say the least frightening. I am sure the Voodoo card will last much longer and run more stable now. We do not intend to overclock the card preferring reliability over frame rates. Long episodes of Unreal Tournament are now a breeze (excuse the pun). Thanks again,

             R. Slater          4.21.00


I just received my order for the Lasagna iOp coolers. Thank you so much. These little things are great. I liked them so much, I placed an order for three more! Please ship these out as soon as possible. Thanks again.

           Jim Nolly         4/20/00


Also I wanted to say that This is one great CPU cooler (MEGA7).   Never am I buying an ALPHA again... :-)

               Matt        4.19.00


  (Click for a Lot More Happy Saying...)


March 23, 2001

Intel begins to ship 900MHz MPU XEON processors for servers.  TennMax has the best active cooling solution for it. Check it out here.

March 21, 2001

Intel P3 CPU reference table has been updated.  It is displayed here.

March 1, 2001

Joe Citarella at www.Overclockers.com has a review on TennMax new Lasagna Slim CPU Cooler design for 1 U server applications with thermal resistance 1.05 C/W.  You may check our the article here.

Feb 5, 2001

Note from a ASUS customer on temperature sensing problem:

just want to let you know what i discovered.
the problem was not related to any heat problem (with Lasagna Cooler). it seemed that a normal temp of my card (acording to internet research) is between 52~74 celsius (125~165 fahrenheit ) the problem was in the software that Asus supplied with the card. it is the software called " smart doctor" which monitors the card (temp & rpm) causing all the problem, after uninstall it everything is ok. if you get e-mail from custmers with Asus cards that share the same problem tell them to see if shutting down the smart doctor. thanks for everything :-)
         Edan Avny

January 8, 2001

TennMax decides to keep the same shipping and handling schedule, despite substantial rate hike, starting today, by US Post Office.

November 23,2000

Great cooling with Lasagna BGA Cooler on a AGP chipset reviewed by Tweakmeister.com

November 8th, 2000

Convenient and quick payment via PayPal is now avaialable,check here.

October 7th, 2000

Phil Koken has just post an review with Lasagna BGA Cooler for GeForce card. There are   excellent pictures in his review.  Check it out yourself here.

October 5th, 2000

New Lasagna BGA Cooler review posted by virtualhideout.net

September 1, 2000

A new P3 STF review is posted by Kevin of overclockers.hypermart.net, Check it out.  The article also mentioned and confirmed that TennMax thermal grease is as good as the much hyped "silver" filled compound.

August 8, 2000

Marco “BigWop” Chiappetta reviewed Stealth Fighters for 3Dfx Voodoo5.  He also used some TennMax Utility heatsinks for the memory chips.

August 6, 2000

Jason at www.extremeoverclocking.com has updated his review on Lasagna BGA Coolers, Type A & B. Check it out!

August 5, 2000

Check out a series of reviews by Joe at  www.overclockers.com about using TennMax Lasagna BGA Cools for cooling AGP chipsets and a hot PLL, clock generator chip.

July 26, 2000

Jason at www.extremeoverclocking.com reviewed Lasagna BGA Coolers for variety of applications.

July 18, 2000

Read the first full review on Stealth Fighter for 3Dfx Voodoo5 by www.3DPower.net

July 6, 2000

BXBoards.com comments on cooling AGP chipset when overclocking PC133 memory chipsets to >150 MHz. Check out the best active AGP Cooler.

June 26, 2000

Today's Wall Street Journal has a story on i-Opener.  Click here to read the article. You need a iOp Cooler to modify this Internet appliance.

June 22, 2000

Check some excellent picture and setup of Stealth Fighter Coolers on V5 5500 cards at www.City-Guide.com

June 12, 2000

The same Stealth V3 Fighter also fits perfectly in the new 3dfx Voodoo5 5500 AGP cards.  You need two coolers per card.  We plan to post more information with pictures soon. Use of the retention push pins provides high cooling efficiency and secure installation.

May 9, 2000

We have made the second large batch of the popular Lasagna iOp Cooler.  The cooler is available for everyone and for quantity order also.

April 19, 2000

An excellent review on MEGA7 Cooler by g3d.arashbest.com  He said MEGA7 is the easist cooler for FC-PGA processor he has ever used.

April 17, 2000

Update on Lasagna iOp Cooler installation and tips can be found here.

April 13, 2000

Cooler for Netpliance I-Opener system is now called TennMax Lasagna iOp Cooler. We will be filling the back orders starting 4/14/00.

March 24, 2000

Netpliance I-Opener computer users are sucessfully using Lasagna Slim CPU Cooler, p/n 50-10-5B-C2 to replace the original simple heatsink for more effective cooling.

March 14 2000

Excellent review on Lasagna BGA Cooler Type B for Matrox G400 Max by Super7.net

March 8th 2000

We decided to cease offering the passive heatsink for AGP chipsets.  Instead, we encouraging the user to use the best active cooling solution for all AGP chipsets by Intel or VIA (all BX chipsets).

March 4th 2000

New Review : MEGA7 on a Celeron PPGA Processor.

March 1st 2000

Two reviews on VIVA K7 STF at Super7.net and BxBoards.com

Feburary 16, 2000

See pictures of VIVA K7 STF Cooler in ASUS K7M (rev. 1.04) system.  The powerful cooler is compact enough to avoid interfering the power cord socket. (original pictures are provided by I. Colledge and C. Grey)

Feburary 9, 2000

VIVA K7 STF Cooler fits perfectly in ASUS K7M (rev. 1.04) Athlon motherboard board.  VIVA K7 may be the only two-fan cooler in the market to fit in that popular board.

February 2, 2000

A great review on Lasagna BGA Cooler for Viper 770 is posted by www.Maximumpain.com

January 8, 2000

First review on Matrox G400 card with Lasagna BGA Cooler Type B by www.heatsink.net Beats the original large heatsink for sure!

December 27, 1999

Selection Guide for nVidia GeForce256 is here.

December 16, 1999

Officially announced P3 STF and VIVA K7 STF Coolers. Both with powerful 34 CFM twin fans. GF Cooler (for GeForce256) page will be ready soon.

December 1, 1999

New and more attractive prices for many TennMax Coolers are set today.   Read the Press Release here.

November 20, 1999

Picture of nVidia GeForce256 with TennMax Lasagan CoolerType B appeared on December 1999 issue of0 PC GAMER Magazine Page 94 & page 210.

November 10, 1999

22nd review on Stealth V3 Fighter appeared on SharkyExtreme

October 27, 1999

Received 21st review on Stealth V3 Fighter, and the first on Voodoo3 3500TV, read here.

October 7,1999

www.tekreview.com review on Lasagna BGA Cooler Type 0 for Viper 770. Said "better than the original fan!". A 5-Star(*****) award.

October 3, 1999

Joe Citarella of Overclockers.com posted an interesting article on cooling the AGP BX chipset using Lasagna BGA Cooler.

September 25, 1999

We now have 17 excellent reviews on Stealth V3 Fighter for Voodoo3 cards.  Read about them!

August 30, 1999

Several excellent reviews on Stealth V3 Fighter have been posted in the last few days. in Italian and German lunguages also.

August 27, 1999

MEGA7 Cooler reviewed by Armin Lenz Fullon3D.com  granted AllStar Hardware Award!

August 9,1999

TennMax MEGA7 Cooler for OCing Celeron PPGA and AMD K-6 2 &3 is now available.

July 29, 1999

3DRage.com reviews Detonator Cooler on GiGabyte TnT2 board.  45MHz over the default!

July 12,1999

Andy Drake of BxBoards.com overclocked his PC133 memory to 152 MHz using the new Lasagna BGA Cooler Type 0 on the BX AGP chipset.  Check out this interesting article.

July 3rd, 1999

First full review on TennMax TnT Detonator for Viper 770 Check it out here.

June 13, 1999

"TennMax is a name to trust" says Voodoo3.net in its review on Stealth V3 Fighter

June 12, 1999

GamePC new computer system uses Stealth V3 Fighter read the News Realease

June 2, 1999

"P3 Cooling the way Intel should have done it!" TennMax P3 TF Cooler review by www.hothardware.com

May 17, 1999

We start to ship Stealth V3 Cooler today!

A massive review by FastGraphics.com reporting that TennMax has helped a TnT2 card to be the BEST of all the advanced 3D cards.   TennMax is proud of such an accomplishment, and we believe that the performance of other cards can be significantly boost also if they have a TennMax cooler on.

May 10, 1999

Review posted at LightSpeed2000.com

April 16, 1999

Press Release on new Stealth V3 Fighter - Cooler for 3Dfx Voodoo3

Another great review on Stealth V2 Cooler by FastGraphics.com

March 24, 1999

Check the popular computer magazine, Maximum PC, April 1999 isuue, Page 57 showing TennMax Coolers.

March 11,1999

US Patent Office has awarded a new patent to TennMax for the invention of the unique spring clip design for fan/sink attachment.  Patent number is 5,860,195. This special clip is supplied on the Ultra and the MEGA7 Coolers.

Feb 22, 1999

TF Cooler is the best Celeron Cooler!  reviewed by Heatsink-Guide

Overclocking ATI Rage Fury with the "famous Lasagna X Cooler" a review by Fastgraphics.com

Feb 4, 1999

TennMax news release; new Lasagna XEON Cooler for Pentium XEON 450 MHz

Jan 30, 1999

An intersting "preview" of TennMax mini Lasagna by Sean at biznizzy.com. (This product has NOT been formally announced yet, do not send inquiry)

Jan. 13, 1999

An excellent Review on TennMax Celeron TF Cooler at HardwareCentral.com

Also read the update on VIVA TF P2 Cooler review

Jan. 5, 1999

Diamond Multimedia endorses Stealth V2 Cooler for Moster3D II - In High-End Systemen (ab PII300), die mit einem Systemtakt von 100 MHz getaktet sind, kann es zu Hitzeproblemen kommen. Dabei wird die Karte meist zu warm. Installieren Sie die Monster 3D II nicht neben anderen "heissen" Komponenten und verbessern Sie die gesamte aktive Rechnerkuehlung. Spezielle "Monsterkuehler" gibt es von Tennmax

Dec. 18 1998

Read the review by John Ariel on VIVA TF Cooler.

Dec.15 1998

See the new Celeron TF Cooler.  We hope to offer this soon.  Is it a Celeron overclocker's dream product? Comment?

Dec. 4, 1998

Check out the powerful XEON Cooler infomration HERE.

Dec 4, 1998

Stanley Mo of NetExcite.com post review of Lasagna Cooler for Mystique G200.

Nov. 27, 1998

Frank Amato of www.thesanctum.net post a review on Stealth V2 Cooler (in SLI), grant a 100% score & Seal of a Great Buy.

Nov. 21, 1998

New TennMax Lasagna Xeon Cooler was shown at COMDEX. This slim and powerful cooler was displayed in a Acer's XOEN server at the show.

Nov. 14, 1998

Adam Dluzniewski reviews on Macintoch Voodoo2 Cooling.

Nov. 13, 1998

Bill's Workshop talks about Lasagna Cooler to replace the OEM heatsink on Banshee cards.

Nov. 7, 1998

Great review on Lasagna X Cooler on Matrox Mystique G200 by MatroxUsers.com

Nov 1st, 1998

Come and Meet TennMax creator of the Stealth V2 Cooler (Vincent) and the inventor of the Lasagna Cooler (Michael) at COMDEX, Las Vegas Nov. 16 - 18, @ booth No. S7443. We will have new products display at the show.

Oct 29, 1998

TennMax Lasagna Celeron Cooler will be announced soon.

Oct. 13, 1998

Lasagna cools 3Dfx Banshee, review by Joshua Krane of AGN3d.com

Oct. 11, 1998

Dan Kennedy post review on TNT Cooling

Oct. 8, 1998

Wicked3D recommeds Stealth V2 Cooler to work with their new dirver 2.6 and up for OC to 100MHz and up.

Oct. 7, 1998

New record of  hits per day on TennMax HomePage.  Thanks to you all!

Oct. 5, 1998

Lasagna TNT Cooler preview posted.  Solvents for cleaning off the glue from OEM heatsink are listed.

Oct. 3, 1998

Upate installation instruction of Lasagna X Cooler on Matrox Millenium G200

Oct. 1, 1998

Diamond Multimedia of Germany has tested Stealth V2 Coolers (in SLI), and recommends the cooler to all users with overheated Monster 3D II.

Lasagna TNT Cooler is basically done.  We are working on the instruction to remove the OEM heat sink and cleaning up the glue left on the Riva TNT.

Sept 24, 1998
Stealth V2 Cooler also fits on Mac Voodoo II card prodcued by Micro Conversions.

Sept 18, 1998
A customer reported that Lasagna Slim Cooler has been successfully installed to overclock the new Celeron 300a to over 500 MHz!

Sept 12
Newest review on Stealth V2 Cooler by Hardware Pros, check it out.

Sept 10
TennMax is prototyping a great cooling solution for Riva TNT boards. Instruction to remove the heatsink on TNT board will also be posted soon.

Sept 3
In private, TennMax has been informed that Lasagna is the BEST Cooling Solution for nVidia TNT 2D/3D board.

Sept. 1
Two winners for August contest have been picked. We are contacitng the wiiners by e-mail, and will announce later.

August 29
Lasagna X Cooler fits Matrox Millennium G200 perfectly. The OEM heatsink can be easily removed and replaced (dtails to come)

August 23
Customers have informed TennMax that the technical service of the most popular Voodoo2 card maker recommends Stealth for overheating problem

August 17
Stealth V2 Cooler Installation instruction updated

August 13,
Chris 'Petrie' Burek post another excellent review on Stealth V2 Cooler for Pure3D II

August 10,
David Yee on OC graphics cards with Lasagna and Stealth V2 Coolers

August 9,
William Gall reviews "tailor made" Stealth V2 Cooler for Pure3D II

August 6,
Check out a great comment on Lasagna X Cooler at En-Riva

August 5,
AMD posts the approved Thermal Solutions for K6-2 3D processors.  Lasagna (p/n 50-10-2B-C2) is the smallest among all solutions.

August 3rd,
Contest is on for August customers

July 31
Chris Burek, www.purified3d.com posted pictures  Stealth V2 Cooler for Pure3D II.

July 27
We have filled (shipped) all the orders received so far  for the custom   Stealth V2 Coolers for Pure3D II baord.

July 22
Stealth V2 Cooler has been mentioned for overclocking v2 card in Shiloh Jennings' Quake SLI benchmark with K6-2

July 20, 1998
Start to offer custom version of Stealth V2 Cooler for Pure3D II.

July 18, 1998
Secure credit card online order is available now for selected products!

July 15, 1998
TennMax has received approval to take online secure credit card purchase.  Online credit card order will be available within two days. Paul M. Barden gives another testimony to TennMax' great cooling solutions.

July 13, 1998
Stealth V2 Review by Dan Kennedy is sited on the popular VoodooExtreme.com,   also sited at Blue News and others. Set the record impressions on TennMax Home Page.

July 12, 1998
Newest TennMax Product - Lasagna Xeon Cooler for Intel Pentium II Xeon processor. Picture posted  here

July 10, 1998
DanTech posted Stealth V2 Cooler review on Creative Lab 3D Blaster 12 Meg.
Start delivering production version of "step-up" spacer block for STB BlackMagic3D, and for Lasagna X for Riva, Permedia, Rendition and other applications.

July 9, 1998
Heatsink Guide Tillmann Steinbreche posted Lasagna X Cooler review for Riva 128, Permedia etc. with new step-up spacer block. Hightech Suppliers starts carrying TennMax VIVA and Ultra Coolers.

July 7, 1998
TennMax supports Patrick Kennedy's anniversary contest with two TennMax Sport Watches. http://www.Thermal.Net  

July 5, 1998
Our affiliate in Singapore, Micropackaging, is now TennMax Singapore.

July 3, 1998
William Ball announces Stealth V2 Cooler is under review. Dave Whittle mentioned it in the new issues of Voodoo Mag - On-line  http://www.voodoomag.com

June 30, 1998
Hardware World Ryan Lucier posted review on Lasagna X Cooler

June 26, 1998
Hardware World reviewed Stealth V2 Cooler and gave an product award to TennMax.

June 20, 1998
Posted picture of STB BlackMagic3D card needs 3 step-up blocks to install the Stealth V2 Cooler

June 17, 1998
Dan Kennedy gave 10/10 review on Lasagna X Cooler (with step-up block) with Diamond Viper 330 Riva 128 card.

June 10, 1998
Press Release on starting to ship Stealth V2 Cooler on schedule. All the pre-order are filled. News release appeared on Yahoo and PR News sites, also sited by VE, OP3Dfx and many others.

June 3, 1998
Announce Stealth V2 Cooler as the most innovative cooling solution for the popular Voodoo2 cards base on the original 3Dfx reference board.

Press release by PRNews, pickup by Yahoo and other game sites

June 1, 1998
Banner advertisement appeared on The Heatsink Guide

[ Home Page][sign our Guestbook]