| P3 STF Cooler | Voodoo3 & GeForce | |
| [Cooler for Socket7/370] | [power cooling for Pentium III] | [SV3F] [GF Cooler] |
TennMax VIVA K7 STF
for AMD Athlon Processors 
Another TennMax Powerful & Sensible Cooling Device ($29.00 only)

Features
- Super Twin Fans (STF) @ 17 CFM each, 34 CFM total air flow.
- Quality, long lasting, quiet ball bearing fans.
- 25 mm tall heatsink, extruded with fine micro grooves for extra large surface area for heat dissipation.
- Total height is 40 mm, 15 mm fans & 25 mm heatsink.
- Single spliced 3-wire connector for both fans to motherboard.
- Easy Push Lever Clip design. Solid construction.
- High thermal conductivity Aluminum Alloy for heatsink and cover.
- Designed for aggressive overclocking of SECC1 processors.
- Thermal grease is provided in the cooler package.
Based on our customer feedback: Air forced out of VIVA Cooler can provide additional cooling to the backside of the adjacent AGP 3D accelerator board. This may enhance the performance your AGP graphics card.
Special note to ASUS K7M users: VIVA K7 STF overall height is only 40 mm. The cooler fits in all Athlon Motherboards, including ASUS K7M rev. 1.04. This information has been confirmed by many VIVA K7 STF users.
Installation:
To Mount the VIVA K7 STF on Athlon Processor
1. Clean the thermal plate, and apply thermal grease in the middle of the plate
2. Push both "Levers" upward (toward the fan) to expose the "hooks" at the opposite ends of the clips.
3. Drop the "end hooks" into the holes B.
4. Pull the cooler slightly towards the top of the cartridge. This will position two cooler's bottom pins into the "locator holes" on the cartridge plate.
5. Firmly press down both levers into the holes A. You should hear a crispy click when the hook sets.
To Dismount the VIVA off Athlon
1.Use a small screw driver and place it under the small "Notch Hooks" just below the Levers. Pry the notch upward towards the fan. You should hear a clear clicking sound when clip releases.
2. The VIVA cooler is then easily removed from the cartridge.
For your reference
| CPU | Die Size, micron | Typical Power dissipation | Max. Power dissipation | Voltage |
| Athlon 550 | .18 | 28 | 31 | 1.6 |
| Athlon 750 | .18 | 35 | 40 | 1.6 |
| Athlon 650 | .25 | 48 | 54 | 1.6/2.5 |
| Athlon 1000 | .18 | 60 | 65 | 1.8 |
| PIII 550 | .18 | 18 | 18.2 | 1.65 |
| PIII 800 | .18 | 26.4 | 26.2 | 1.65 |
| PIII 1000 | .18 | 33 | 32.8 | 1.7 |
| PIII 600 (katmai) | .25 | 34.5 | 34.5 | 2.05 |
more about PIII Coppermine check here
[
Home Page] [order information]