TennMax Lasagna BGA Cooler Selection Guide

TennMax Lasagna BGA Cooler
Selection Guide for your Graphics Cards
GeForce, TnT2, TnT, Ati, Matrox, Banshee, AGP Chipsets


BGA Cooler Type A	BGA Cooler Type B	BGA Cooler Type 0
Use push-pins to fit the holes at the diagonal corners of the chipset.	Use push-pins to fit the holes on the sides of the chipset.	Use special adhesive tape to attach the cooler on the chipset.
Note: Match the Correct Coolers to Your Video Cards.
AGP on Motherboard	Matrox Use Type B with modified holes for push pins to replace new green heatsink as shown in the AGP Cooler page, Check here ASUS A7V and CUSL2 use this new "greenie"	nVidia TnT 3DFX Voodoo1 & Voodoo4
Type A Cooler	Type B Cooler	Type 0 Cooler
If you do not find your card in this selection guide, you can always use Type 0 Cooler which is the most universal fit for all BGA chipsets. If your chipset has holes in the diagonal corners, you would need Type A. And if the chipset has holes for retention push pins on the sides, then most likely you would need Type B. Note: for Creative TnT2 Owner, Check your model number and the availability of the push-pins on your board before choosing Type 0 or B. Also for ELSA Erazor III, you may modify holes on Type B Cooler to make it fit on the ELSA board. To remove the original heatsink and cleaning the chipset surface, here is an application note.